Planet MGSW-24160F User Manual page 19

User's Manual of MGSW-24160F
AC and DC Redundant Power to ensure continuous operation
PLANET MGSW-24160F is equipped with one 100~240V AC power supply unit and one additional DC 36 ~ 72V power supply
unit for redundant power supply installation. A redundant power system is also provided to enhance the reliability with either
100~240V AC power supply unit or DC 36 ~ 72V power supply unit. Redundant Power Systems are specifically designed to
handle the demands of high tech facilities requiring the highest power integrity. Furthermore, with the 36~ 72V DC power supply
implemented, the MGSW-24160F can be applied as the telecom level device that could be located at the electronic room.
Digital Input and Digital Output for external Alarm
PLANET MGSW-24160F supports Digital Input, and Digital Output on the front panel, this external alarm offers technician use
Digital Input to detect, and log external device status (, such as door intrution detector ) then alarm. As Digital Output could be
used to alarm if MGSW-24160F port link down, link up or power failure.
Cost-effective IPv6 Managed Gigabit Switch solution for industrial
Nowadays, lots of electronic products or mobile devices can browse the Internet, which means the need of IP Address
increases. However, the current IPv4 network infrastructure is not capable enough to provide IP Address to each single
users/Clients. The situation forces the ISP to build up the IPv6 (Internet Protocol version 6) network infrastructure speedily.
To fulfill the demand, PLANET releases the IPv6 management Gigabit Ethernet Switch. It supports both IPv4 and IPv6
management functions. It can work with original network structure (IPv4) and also support the new network structure (IPv6) in
the future. With easy and friendly management interfaces and plenty of management functions included, the MGSW-24160F
Managed Switch is the best choice for you to build the IPv6 FTTx edge service and for Industrial to connect with IPv6 network.
Layer 2 / Layer 4 Full-functioned Managed Switch for Building Automation Networking
The MGSW-24160F Industrial Managed Ethernet Switch is ideal for applications in the factory data centers and distributions. It
provides advanced Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network access control
and authentication, and Secure Management features to protect customer's industrial network connectivity with reliable
switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures.
Powerful Security
The Managed Switch offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection
mechanisms also comprise of port-based 802.1x and MAC-based user and device authentication. The port-security is effective
in limit the numbers of clients pass through, so that network administrators can now construct highly secured corporate
networks with time and effort considerably less than before.
19