Authentication Server Configuration - Planet MGSW-24160F User Manual
16-port 100/1000base-x sfp + 8-port 10/100/1000base-t l2/l4 managed metro ethernet switch
Hide thumbs
Also See for MGSW-24160F:
- Command manual (433 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
Last Authentication
Buttons
Auto-refresh
: Check this box to enable an automatic refresh of the page at regular intervals.
:
Click to refresh the page immediately.
: This button is available in the following modes:
• Force Authorized
• Force Unauthorized
• Port-based 802.1X
• Single 802.1X
Click to clear the counters for the selected port.
: This button is available in the following modes:
• Multi 802.1X
• MAC-based Auth.X
Click to clear both the port counters and all of the attached client's counters. The "Last Client" will not be cleared,
however.
: This button is available in the following modes:
• Multi 802.1X
• MAC-based Auth.X
Click to clear only the currently selected client's counters.
4.11.6 Authentication Server Configuration
This page allows you to configure the Authentication Servers. The Authentication Server Configuration screen in
appears.
remain in the unauthenticated state for Hold Time seconds.
Shows the date and time of the last authentication of the client (successful as well as
unsuccessful).
231
User's Manual of MGSW-24160F
Figure 4-11-7
- Quick Links:
- Ip Configuration
Hide quick links:
Advertisement
Table of Contents
