Procedure For Tilting Down (Manual Tilt Models); Procedure For Tilting Down; Cruising In Shallow Water - Yamaha F25D Owner's Manual

Operation
sure.
5. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch "
trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU30190
Procedure for tilting down (manual
tilt models)
1. Place the tilt lock lever in the lock posi-
tion.
2. Slightly tilt the engine up until the tilt sup-
port bar is automatically released.
3. Slowly tilt the engine down.
EMU28052

Procedure for tilting down

Power trim and tilt models / power tilt models
1. Push the power tilt / power trim and tilt
switch " " (up) until the outboard motor
is supported by the tilt rod and the tilt
support lever / tilt support knob becomes
free.
2. Release the tilt support lever or pull out
44
" (down) to retract the
ZMU02306
the tilt support knob.
3. Push the power tilt / power trim and tilt
switch " " (down) to lower the outboard
motor to the desired position.
UP
DN
DN
EMU28060

Cruising in shallow water

The outboard motor can be tilted up partially
to allow operation in shallow water.
ZMU02825
ZMU01936
DN
ZMU02826