EMU28005
Procedure for tilting up
Power trim and tilt models / power tilt models
1.
Place the remote control lever / the gear
shift lever in neutral.
2.
Disconnect the fuel line from the out-
board motor or close the fuel cock.
3.
Press the power trim and tilt switch /
power tilt switch "
board motor has tilted up completely.
N
ZMU02304
ZMU02302
" (up) until the out-
4.
Push the tilt support knob into the clamp
bracket or pull the tilt support lever to-
ward you to support the engine.
EWM00260
WARNING
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit loses pres-
Operation
UP
ZMU02823
ZMU02812
43