Yamaha F25D Owner's Manual page 38

Operation
3. Place the throttle grip in the "
(start) position.
START
START
4. Pull the manual starter handle slowly un-
til you feel resistance. Then give a
strong pull straight out to crank and start
the engine. Repeat if necessary.
5. After the engine starts, slowly return the
manual starter handle to its original po-
sition before releasing it.
32
NOTE:
When the engine is cold, it needs to be
G
warmed up. For further information, see
page 35.
If the engine is warm and fails to start,
G
open the throttle slightly and try to start the
engine again. If the engine still fails to
start, see page 72.
ZMU02026 EMU27600
Electric start/prime start models
"
1. Place the gear shift lever in neutral.
ZMU02335
NOTE:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2. Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg. Then install the lock plate on
the other end of the lanyard into the en-
gine stop switch.
EWM00120
Attach the engine stop switch lanyard
G
to a secure place on your clothing, or
your arm or leg while operating.
ZMU02336
Do not attach the lanyard to clothing
G
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing it from functioning.
Avoid accidentally pulling the lanyard
G
N
WARNING
ZMU02304