All Reset; Using The Bezel - Citizen C70 Instruction Manual

Table of Contents

Advertisement

7. ALL RESET

After replacement of the battery, be sure to perform the all reset operation as
shown below.
If the watch malfunctions or shows an abnormal display as a result of an
excessive shock or static electricity (for example, the watch indicates nothing,
continuously sounds alarm, etc.). Perform the all reset operation.
Crown
M
0
1/1
SEC
M
TEMP
F
MODE
C
A
P
B
A
SPLIT
SUM.
32
(1) Pull the crown out.
(2) Simultaneously press buttons A, B and
M.
(3) Release the three buttons.
(4) Press the crown back. (A confirmation
sound is heard.)
All reset operation is complete.
Before use, reset the watch for the correct
time in all modes.

8. USING THE BEZEL

Some watches do not have the following bezel functions because of differences
in type or design.
1. Compass function
2. Yachting function
1. Compass function (in the northern hemisphere)
Compass direction can be approximated by this function, based on the direction
of the sun.
<Finding compass direction>
Point the hour hand in the direction of the
sun. The midpoint between the hour hand
and the 12 hours mark is roughly equal to
south. Point the "S" mark in the south
direction and you can read the approximate
directions of the compass. Use this
indication just as a guideline because the
indication changes slightly depending on
the season and latitude.
12 hours
South
S
33

Advertisement

Table of Contents
loading

Table of Contents