Alarm 1 & 2 Modes <Al-1, Al-2 - Citizen C70 Instruction Manual

C. Alarm 1 & 2 modes <AL-1, AL-2>
The only difference between alarm 1 and alarm 2 is the sound. The two modes
are the same in use and setting manner. When either alarm is set (ON) once, it
sounds for 20 seconds at the same time every day.
<Setting alarms>
[Normal alarm display (ON)]
(1) Press button B in alarm mode for more than
Temperature
M
0
(2) Press button A to adjust "Hours".
1/1
SEC
(3) While the "Hours" is blinking, press button B
TEMP
MODE
(4) Press button A to adjust "Minutes".
C
A
B A
(5) Press button M to return the watch to normal
Alarm time ON or OF (off)
(hours, minutes)
14
2 seconds. The "Hours" starts blinking to
indicate that the watch enters alarm setting
mode. The blinking figures can be adjusted.
to start the "Minutes" blinking.
(Pressing button A continuously changes
the figures quickly.)
alarm display.
<Switching alarm ON/OFF>
Each time button A is pressed while in normal alarm display, the alarm is
switched ON/OF(off) alternately.
("ON": alarm is on, "OF": alarm is off.)
A
< Alarm sound duration, Stopping alarm>
The Alarm sound duration is 20 seconds. Alarm sound stops by pressing any
button.
<Monitoring sound>
While button A is being pressed in alarm mode, the alarm continues to sound.
A
A
15