Electrical Connection - Electrolux ESI 6231 User Information

Extension hoses
• Extension hoses are available from your dealer or
from our Customer Care Department. To ensure
that the function of the appliance is not impeded,
the internal diameter of extension hoses must be
19 mm.
• Extension hoses must not be laid more than a
maximum distance of 4 metres horizontally; the
maximum permitted height for the connection for
the drain hose is then 85 cm.
Sink outlet connection
• The outlet of the drain hose (ø 19 mm) fits all com-
monly available sink outlet types. The outer diame-
ter of the sink outlet connection must be at least
15 mm.
• The drain hose must be fixed to the sink outlet
connection using the hose clamp supplied.
Water drainage if the dishwasher is built-
in at high level
If the dishwasher is installed at a high level, and the
drain hose connection is less than 30 cm from the
lower edge of the
ET 111099520 must be fitted by the Customer Care
Department.
Anti-flood system
For protection from water damage, the dishwasher is
equipped with a anti-flood system.
In the event of a fault, the safety valve immediately
interrupts the supply of water to the appliance and
the drain pump is activated.
In this way water can neither escape nor overflow.
The remaining water in the appliance is automatically
pumped out.

Electrical connection

Details about the voltage, type of supply and the fus-
es required are to be found on the rating plate. The
rating plate is located on the right-hand inner edge of
the dishwasher door.
To isolate the dishwasher from the mains, pull out the
mains plug.
Important:
– The plug must be accessible after the appliance
has been installed.
– Following installation, live parts and insulated wir-
ing must not be accessible to a test finger in ac-
cordance with DIN EN 60335-1.
appliance, adapter kit
32