Vax U87-W2 Series User Manual
Vax U87-W2 Series User Manual

Vax U87-W2 Series User Manual

Vacuum cleaner

Advertisement

Quick Links

COMMERCIAL
White 2

User Guide

U87-W2 Series
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Performance is everything.
vax.co.uk

Advertisement

Table of Contents
loading

Summary of Contents for Vax U87-W2 Series

  • Page 1: User Guide

    COMMERCIAL White 2 User Guide U87-W2 Series Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Performance is everything. vax.co.uk...
  • Page 2: Your Machine

    Your machine Handle 2-in-1 tool (crevice tool and dusting brush) Brushbar height adjust Cord wrap (hidden) Separator Dirt container On/off button (hidden) HEPA central filter Hose 10 TurboTool (some models only) TurboTool connector (some models only. NOTE: This will be attached to the TurboTool) TurboTool holder (some models only)
  • Page 3: General Safety Information

    See Maintenance; Clearing Blockages. IMPORTANT: Cleaning filters maintains vacuum performance. Vax recommends that your filters should be checked and cleaned at least every 3 months (depending on the level of use). If your filters are washable make sure they are completely dry before inserting back into the vacuum cleaner.
  • Page 4: Getting Started

    Getting started PLEASE READ SAFETY INFORMATION BEFORE USE (PAGE 3) Assembling your upright Using a crosshead screwdriver, Slide the handle down onto the Return the screw and tighten, remove the screw from the back of main body of the unit. securing the handle into the main the unit as shown.
  • Page 5 Attaching the TurboTool holder Attach the TurboTool holder to handle. Then fit the Turbotool to the TurboTool holder. vax.co.uk...
  • Page 6: How To Use

    Vax cannot be held responsible for damage to these surfaces if the consumer fails to take notice of this recommendation.
  • Page 7: Using The Accessories

    IMPORTANT: When the vacuum cleaner is stood in the upright position, or when using the hose and tools, the brush bar height adjust must be set to the highest position. vax.co.uk...
  • Page 8: Looking After Your Machine

    Looking after your machine Emptying and cleaning the dirt container Always switch off the appliance and unplug the mains socket before carrying out any maintenance. Press dirt container release button Hold dirt container over a bin and to remove the dirt container. press the dirt container latch to open, allowing dirt to fall out.
  • Page 9: Cleaning The Hepa Filter

    IMPORTANT: It is very important to keep the filters clean to maintain Cleaning the HEPA filter maximum performance of the vacuum. Vax recommend that your filters should be cleaned at least every 3 months (depending on the level of use). Do not use detergent to clean the filters.
  • Page 10 Looking after your machine Replacing the belt Turn unit over and remove the Remove the brushbar cover from Lift the brush bar out of the base of six screws using a crosshead the base of the unit. the unit. Next, remove the belt from screwdriver as indicated by arrows.
  • Page 11 • Hose blockages: remove the hose from the unit. Carefully remove any blockages found and reconnect hose securely. • Accessory blockages: remove accessory from handle/tube. Carefully remove blockage and re-attach to the vacuum cleaner. • The accessory may be faulty. Simply call us on 0844 412 8455 for assistance. vax.co.uk...
  • Page 12: Machine Overview

    Service & Help Any queries or concerns about using your Vax, simply visit; vax.co.uk/support - vaxireland.ie or, call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
  • Page 13 Notes vax.co.uk...
  • Page 14 Notes...
  • Page 15 Notes vax.co.uk...
  • Page 16 COMMERCIAL Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk Performance is everything. Version 1.0...

This manual is also suitable for:

White 2 u87-w2 series

Table of Contents