The Advanced Screen - ZyXEL Communications AMG1312-T Series User Manual

The following table describes the labels in this screen.
Table 27 Network Setting > Wireless > Scheduling
LABEL
Wireless LAN
Scheduling
State
Day
Time (24-Hour
Format)
Apply
Cancel

7.9 The Advanced Screen

Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Advanced, the screen appears as shown.
See Section 7.10.2 on page 104
Figure 39 Network Setting > Wireless> Advanced
The following table describes the labels in this screen.
Table 28 Network Setting > Wireless> Advanced
LABEL
Fragmentation
Threshold
Output Power
Preamble
AMG1312-T Series User's Guide
DESCRIPTION
Select Enable or Disable to activate or deactivate wireless LAN scheduling on your
AMG1312-T Series.
Select On or Off to enable or disable the wireless LAN.
Check the day(s) you want to turn the wireless LAN on or off.
Specify a time frame during which the schedule would apply.
For example, if you set the time range from 12:00 to 23:00, the wireless LAN will be
turned on only during this time period.
Click this to save your changes.
Click this to restore your previously saved settings.
for detailed definitions of the terms listed in this screen.
DESCRIPTION
This is the maximum data fragment size that can be sent. Enter a value between 256 and
2346.
Set the output power of the AMG1312-T Series. If there is a high density of APs in an
area, decrease the output power to reduce interference with other APs. Select one of the
following: 100%, 75%, 50% or 25%.
Select a preamble type from the drop-down list menu. Choices are Long or Short. See
the Appendix D on page 268 for more information.
Chapter 7 Wireless LAN
101