Internet Access - ZyXEL Communications AMG1312-T Series User Manual

27.3 Internet Access

I cannot access the Internet.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
1
Start Guide and
Make sure you entered your ISP account information correctly in the wizard. These fields are case-
2
sensitive, so make sure [Caps Lock] is not on.
If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless
3
client are the same as the settings in the AP.
If you are trying to access the Internet wirelessly, make sure you enabled the wireless LAN and
4
have selected the correct country and channel in which your AMG1312-T Series operates in the
Wireless LAN > AP screen.
Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again.
5
If the problem continues, contact your ISP.
6
I cannot access the Internet anymore. I had access to the Internet (with the AMG1312-T
Series), but my Internet connection is not available anymore.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
1
Start Guide and
Turn the AMG1312-T Series off and on.
2
If the problem continues, contact your ISP.
3
The Internet connection is slow or intermittent.
There might be a lot of traffic on the network. Look at the LEDs, and check
1
225. If the AMG1312-T Series is sending or receiving a lot of information, try closing some
programs that use the Internet, especially peer-to-peer applications.
Check the signal strength. If the signal strength is low, try moving your computer closer to the
2
AMG1312-T Series if possible, and look around to see if there are any devices that might be
interfering with the wireless network (for example, microwaves, other wireless networks, and so
on).
Turn the AMG1312-T Series off and on.
3
AMG1312-T Series User's Guide
Section 27.1 on page 225.
Section 27.1 on page 225.
Chapter 27 Troubleshooting
Section 27.1 on page
227