Electrolux ERA37300W User Manual page 13

The manufacturer declines all responsibility if
the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
Removing the transport support
Your appliance is equipped with transport
support to secure the door during transpor-
tation.
To remove them do these steps:
1. Open the door.
2. Remove the transport support from the
door sides.
3. Remove the transport support from the
lower hinge (some models are fitted with
this).
Important! Some models are fitted with a
silencing pad under the cabinet. Do not
remove this pad.
3
Removing the shelf holders
Your appliance is equipped with shelf retain-
ers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
Levelling
When placing the appliance ensure that it
stands level. If necessary adjust the feet us-
ing the adjustment spanner supplied.
Door reversibility
2
To change the opening direction of the door,
do these steps:
1. Remove the plug from the power socket.
2. Remove the ventilation grille. Remove
the filling and install it on the opposite
side of the grille.
3. Lay the appliance back side down on a
wooden support.
4. Unscrew and remove the front cover (a).
5. Unscrew the hinge pin (b) and remove
the door.
6. Remove the two covers on the roof (c).
electrolux 13