Denon RCD-M35DAB Operating Instructions Manual page 23

(4) Playing the tracks in a certain order ........................................................................
(Using the remote control unit)
1 Press the PROG/ DIRECT button.
Press the number and +10 buttons to select
the track to be programmed.
2
• For example, to program the 3rd track and the
12th track, press , , and
3 +10 2
Press the 1 / 3 (play/pause) button to start
playback.
3
• The tracks are played in the programmed
order.
• Press the PROG/DIRECT button again to resume normal playback during the stop mode.
• To cancel the entire program, press the PROG/DIRECT button or cancel the program one by
one using the CLEAR button.
• If you program the wrong track, press the CLEAR button then program the right track. (The
last track in the program is erased each time the CLEAR button is pressed.)
• To confirm the programmed playing order, press the CALL button. The programmed playing
order appears in the display. Pressing the CLEAR button with a track number appearing in the
display automatically erases that specific track from Program Play.
Programmed Playback
1
2
3
Displays when the 3rd track is set at the
first place.
after 5 seconds
Displays the total number of programmed
tracks and total playing time.
.
Displays when the 12th track is set at the
second place.
after 5 seconds
Displays the total
programmed tracks and total playing
time.
Other operations possible during programmed playback:
Such operations as quick search, pause and skip monitor are also possible during programmed
playback.
For the quick search function, press the automatic search reverse button (
the beginning of the track, then press it again while the time display reads "00:00" to move back
to the beginning of the preceding track.
To move ahead to the beginning of the next track, press the automatic search forward button
9
( ) regardless of the time display.
NOTES:
• With this CD receiver, you can program up to 25 tracks.
• The entire program is canceled when the
• Set the stop mode when cancelling tracks from the program. To cancel the program mode,
press the PROG/DIRECT button.
Automatic search forward button ( 9 )
Automatic search reverse button ( 8 )
(5) Moving ahead to the next track during playback ......................................................
Press the automatic search forward button (
number of
(6) Moving back to the beginning of the track during playback .......................................
Press the automatic search reverse button (
8
) to move back to
5
(open/close) button is pressed.
Automatic Automatic
search reverse search forward
button ( 8 ) button ( 9 )
Quick Search
9
).
Quick Search
8
).
23