Denon DN-V300 Operating Instructions Manual page 25

w When "96k LPCM OUT" is selected:
Press the ENTER button several times and select the conversion
mode.
96k (Factory default)
When playing linear PCM DVDs that are not copyright-protected, for
2-channel PCM audio signals up to 96 kHz, linear PCM signals are
output as such without being converted from the digital outputs.
PCM signals of 48 kHz/16 bits and lower are output, regardless of
whether they are copyright-protected or not.
For DVDs containing multi-channel PCM signals, the digital signals
are down-mixed for output into two channels, front left and right.
(Only the front left and right channels are output for sources for
which down-mixing is prohibited.)
When playing copyright-protected linear PCM DVDs, in consideration
of copyrights, no digital signals are output for sources exceeding 48
kHz/16 bits. When playing such sources, either set to "96k>48k" or
make analog connections (see page 14).
96k>48k
Linear PCM and packed PCM signals are converted to 44.1 kHz or
48 kHz and output. (The PCM digital audio output signals are
converted to 48 kHz or less in consideration of copyrights.) When
making digital connections to an AV amplifier that is not compatible
with 96 kHz/88.2 kHz signals, set to "96k>48k".
3
When playing DVDs recorded in linear PCM or packed PCM and the
unit is set to output digital and analog audio signals simultaneously,
the analog audio output signals are also converted to 48 kHz or
below, so we recommend setting to "96k" and also making analog
connections.
e When "DOWNMIX" is selected:
Press the ENTER button several times and select the output format.
LT/RT (Factory default)
Set this when connecting the unit to a Dolby Pro Logic decoder.
STEREO
Set this when connecting the unit to a stereo device.
r When "COMPRESSION" is selected:
OFF (Factory default)
Select this for the standard range.
LEVEL
Select this to achieve powerful sound even when the volume is low.
This setting is suited for watching DVDs late at night with the
volume low. (This setting is only valid for DVDs recorded in Dolby
Digital.)
To exit the setup mode
Press the RETURN or SETUP button.
ENTER
Remote control unit Remote control unit
AUDIO SETUP
DIGITAL OUT
96K LPCM OUT
DOWNMIX
COMPRESSION
SET ENT E R BUTTON
SELECT
SET 96K LPCM TO 48K OUT
AUDIO SETUP
DIGITAL OUT
96K LPCM OUT
DOWNMIX
COMPRESSION
SET ENT E R BUTTON
SELECT
SET DOWNMIX MODE
AUDIO SETUP
DIGITAL OUT
96K LPCM OUT
DOWNMIX
COMPRESSION
SELECT SET ENT E R BUTTON
DYNAMIC RANGE COMPRESSION
ENGLISH
PCM
96K
LT/RT
OFF
PCM
96K
LT/RT
OFF
PCM
96K
LT/RT
OFF
25