Denon DN-V300 Operating Instructions Manual page 12

ENGLISH
(3) Connecting to a AV amplifier with a Built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player's digital
audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence
of a movie theater or concert hall.
DN-V200/DN-V300
Surround speaker
NOTE:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played while using
a decoder, etc., that is not DTS-compatible.
2 Connecting an optical fiber cable to the digital audio input connector (OPTICAL)
Remove the dust cap, line up the cable in the proper directly, then insert it securely as far as it goes.
12
Optical fiber cable
Front speaker
(left)
AV amplifier with a built-in decoder
(left)
Line up in proper direction
To power outlet
Center speaker
Digital audio input
connector (OPTICAL)
(AV control center)
Front speaker
(right)
Subwoofer
Surround speaker
(right)