Table of Contents
Advertisement
ENGLISH
NAMES AND FUNCTIONS OF PARTS
q
Power Operation Button (POWER)
• When the power is turned on, "00" appears at the track
number display, and if no disc is loaded, "00
appears on the number display and the calendar lights.
w
Display Button (DISPLAY)
• Press this button to change the brightness of the display.
• Press once to make the display 2/3 as bright as normal.
• Press again to make the display 1/3 as bright as normal.
• Press once again to turn the entire display off during playback
and all but the track number off in any other mode.
e
Disc Holder
• This is where the disc is loaded.
• Press the disc holder
close the disc holder.
• The disc holder is also closed if the
r
Play Button (
1
• Press this button to start playback of a disc.
• When this button is pressed,
number being played is displayed together with the elapsed
playback time of the track.
• Tracks are shown on the calendar display. Once a track has
been played, the corresponding track number goes out on
the calendar display.
t
Stop Button (
2
• Press this button to stop playback.
• The disc will stop rotating, and the number of tracks and total
playing time of the disc are displayed on the TRACK NO. and
TIME displays, respectively.
• In case programmed playback is engaged when this button is
pressed, the number of tracks and total playing time of the
program are displayed.
y
Automatic Search Reverse Button (
• Press this button to return the pickup to the beginning of the
present track. Press again to return to other tracks.
• By pressing the button a number of times, the pickup will
move back the corresponding number of tracks.
u
Automatic Search Forward Button (
• Press this button to move the pickup forward to the
beginning of the next track. Press again to move ahead to
other tracks.
• By pressing the button a number of times, the pickup will
advance the corresponding number of tracks.
Continuous Operation
If the automatic search reverse button
search forward button
button will be repeated.
i
Remote Control Sensor
• This is the sensor for the wireless remote control signals.
• For remote control, point the supplied remote control unit
towards this sensor.
• When a signal is transmitted from the remote control unit,
the remote control indicator in the display
briefly.
6
!0
OPEN/CLOSE button
to open and
5
PLAY button
1
PLAY)
1
is displayed, and the track
STOP)
)
8
9
y
, the automatic
u
, are held in, the function of that
o
will light up
o
Display Window
• The digital display is divided into sections, such as displays
0000"
for track number, index, playback time and calendar, as
00
shown below.
Program indicator
Remote control
indicator
Repeat indicator
r
.
Pause indicator
Play indicator
!0
Disc Holder Open/Close Button (
• Press this to open and close the disc holder
• When pressed, the disc holder
again, the disc holder
• If a disc is loaded, the total number of tracks on the disc and
the total playing time appear on the display window
several seconds after the disc holder
!1
Headphones Jack (PHONES)
• Use this jack to plug in headphones. (Headphones are sold
separately.)
!2
Volume Adjust Control (PHONES LEVEL)
• Use this to adjust the output level (volume) of the
headphones.
!3
Digital Output Jack (COAXIAL)
• This jack outputs digital data.
• We recommend using a 75 Ω/ohms pin cord (available in
stores) for connections.
!4
Digital Output Jack (OPTICAL)
)
• Digital data is output in optical from this jack.
• Contact your nearest DENON Consumer Center or office for
information on the optical fiber cable to be used for
connection.
!5
Analog Output Terminal (ANALOG OUT)
• Connect these to the amplifier's input jacks. (Refer to page 7.)
!6
AC Inlet (AC IN)
• Connect the included AC cord here.
Peak search
Remaining time
indicator
Auto space
of entire disc
indicator
Remaining time of
current track
Random Play
20-track music calendar
indicator
5
OPEN/CLOSE)
e
.
e
opens. When pressed
e
closes.
e
is closed.
Edit
indicator
o
Advertisement
Table of Contents
