Denon DCD-1650R Operating Instructions Manual page 12

ENGLISH
(11) Pausing At the Beginning of a Track
After Searching ..........................................................
q Direct Search
• Pausing at the beginning of a track found with the direct search
operation comes in handy for practicing karaoke.
2
( PAUSE )
3
3
( Number buttons )
1. Press the DIRECT button.
2. Press the PAUSE button.
3
To start playback, press either the
button
3. Use the number buttons to set desired track.
w Program Search
• Press the PAUSE button after programming tracks. The
3
beginning of the first track in the program is found and the disc is
paused there.
(12) Playing Tracks in Random Order............
• All of the tracks recorded on the disc can be played once in
random order.
1. When the RANDOM button is pressed, the RANDOM indicator
lights and RANDOM playback starts automatically.
• If the random button is pressed when tracks are programmed,
only the programmed tracks are played at random.
• If the RANDOM button is pressed when the repeat function is
set, all tracks will be played through once in random order, after
which all tracks will be played through again in different order,
and so on.
• During the search operation, the track numbers from the first to
the last track on the disc are displayed in rapid succession on
the track number display, so you cannot tell what track is going
to be played next until playback begins.
NOTE:
• The total remaining time is not displayed during the random
mode.
• The auto edit mode is cancelled if the RANDOM button is pressed
during the auto edit mode.
12
Pause
(Remote control only)
DISPLAY
PLAY
TIME
PAUSE
REPEAT
STOP RANDOM
( DERECT )
1 2 3 DIRECT
1
4 5 6 PROGRAM
7 8 9 INDEX
0 +10 CLEAR CALL
1 PLAY button or the 3
Random Playback
(Remote control only)
DISPLAY
PLAY
TIME
PAUSE
REPEAT
( RANDOM )
STOP RANDOM
1
(13) Edit Recording on Sides A
and B of the Tape ..........................................
Auto Edit Function (AUTO EDIT)
The auto edit function automatically divides the tracks on the
compact disc into sides A and B, with the division at the beginning
of a track in such as way that the disc's total playing time is divided
as close as possible by one half.
( PLAY )
1
2, 3
( 3 PAUSE )
2, 3
1. When the AUTO EDIT button is pressed in the stop condition, the
total play time of side A (the first half) and the track numbers (on
the calendar) are displayed for about 2 seconds. Next, the side B
(last half) information is similarly displayed after which the player
automatically pauses at the beginning of the first track of side
PAUSE
A.EDIT will be lit on the display at this time.
2. Pressing the 1
play mode. When side A has finished playing, the player will
pause at the beginning of the first track on side B.
3. Pressing the
1
start the play mode. When side B has finished playing, the player
automatically stop.
NOTE:
• Auto editing is not possible on discs including 21 tracks or more.
• Direct search is not possible during auto editing.
• The total playing time on the disc is not the same as the total of
the track times, so the time displayed in the stop mode (total
playing time) may not be the same as the total of the times for
sides A and B in the auto edit mode. (There may be a difference
of approximately 2 seconds.)
(14) To Search for the Peak Level
of the Disc .........................................................
• The player searches for the peak portion and plays a few seconds
either side of this point repeatedly. This is convenient for making
recording adjustments on the tape recorder.
( PEAK )
1
1. When the PEAK button is pressed in the stop mode, the PEAK
indicator will flash and the player will search for the portion having
the peak level.
• After the search, the PEAK indicator lights up and a few
seconds either side of the peak level point are played back
repeatedly. This is convenient for making recording adjustments
on the tape recorder.
• To cancel the peak search press the
• When the
1
during peak search or while playing the peak portion back
repeatedly, the player will go to the beginning of the first
track(the first track of the program for program playback) and
begin playback from here if the play button was pressed or
enter the pause mode if the pause button was pressed.
(Remote control only)
PEAK AUTOSPACE AUTO EDIT
1
DISPLAY
( AUTO EDIT )
PLAY
TIME
PAUSE
REPEAT
STOP RANDOM
PLAY button or the 3 PAUSE button will start the
PLAY button or the PAUSE button again will
3
(Remote control only)
OPEN/
CLOSE
PEAK AUTOSPACE AUTO EDIT
STOP button.
2
PLAY button or the PAUSE button is pressed
3
Edit Function
Peak Search