Denon DCD-1650R Operating Instructions Manual page 10

ENGLISH
w Checking the Programmed Tracks
1. Press the CALL button.
• The programmed tracks are displayed in order on the TRACK
NO. display each time the CALL button is pressed.
e Playing the Programmed Tracks
B
POWER
DISPLAY
¢ ON £ OFF
1. Press the PLAY button to play the tracks in the programmed
1
order.
r Correcting Programs
2
( Number buttons )
1. To correct a programmed track, first press the CLEAR button.
2. Press the number buttons and the +10 button to program the
correct track.
• The last track programmed is replaced with the correct track.
• To clear a track in the middle of the program, use the CALL
button to call out that track, then press the CLEAR button to
clear it from the program.
t Clearing the Entire Program
• Press the DIRECT button to clear the entire program. The entire
program can also be cleared by pressing the
button.
• If the DIRECT button is pressed during programmed playback, the
program mode is cleared and normal playback continues from that
track on.
NOTES
• If the programming operation is performed in the play or
pause mode, the current track is programmed as the first
track in the program. Other programs can be added, but the
number of programmed tracks and playing time will not be
displayed.
• Direct search is not possible during programmed playback.
Pressing the number buttons adds tracks to the end of the
program.
• Programming is also possible when the disc holder is open.
A track number greater than the number of tracks on the
disc can be set in the program, but it will automatically be
cleared from the program before playback starts.
• The remaining time per track can only be displayed for the
first 20 tracks on the disc.
• The total program time and remaining program time as well
will not be displayed if tracks numbers greater than 20 are
programmed.
10
(Remote control only)
1 2 3 DIRECT
4 5 6 PROGRAM
7 8 9 INDEX
0 +10 CLEAR CALL
1
( CALL )
REMOTE CONTROL UNIT
RC-281
1
( 1 )
PLAY
STOP
1 2 8 9
OPEN/CLOSE PHONES PHONES LEVEL
5
TRACK INDEX TIME
1 ‚¤ ‚⁄ ‚‹ ›°
M S
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
MIN MAX
COMPACT DISC PLAYER DCD-1650SR
(Remote control only)
1 2 3 DIRECT
4 5 6 PROGRAM
7 8 9 INDEX
0 +10 CLEAR CALL
1
( CLEAR )
REMOTE CONTROL UNIT
RC-281
OPEN/CLOSE
5
(6) Play All Tracks Repeatedly ........................
PLAY
2
( 1 PLAY )
PAUSE
STOP
1. Press the REPEAT button. The REPEAT indicator lights.
2. Press the 1 PLAY button.
• The operation is the same whether button 1 or 2 is pressed
first.
• The one-track repeat mode is set if the REPEAT button is
pressed again during repeat playback.
• The all-track repeat mode is set even if the REPEAT button is
pressed during playback.
• To cancel the repeat mode, press the REPEAT button twice.
• If the REPEAT button is pressed during programmed playback,
the tracks are repeated in the programmed order.
(7) Playing a Single Track Repeatedly ...........
PLAY
PAUSE
STOP
Press the REPEAT button twice.
2nd track 3rd track
1. Press the REPEAT button twice during playback. The REPEAT
indicator lights, and if you are at track number 20 or less, that
number appears on the calendar display and that track is played
repeatedly.
• For track numbers 21 and above, the track number is not
displayed on the calendar display but the one-track repeat mode
will function.
• If the REPEAT button is pressed twice in the stop mode, track
number 1 appears on the calendar display and one-track repeat
is possible. Press the 1 PLAY button to start playback.
• Press the REPEAT button once again to cancel the one-track
repeat mode.
The display and playback return to normal.
Repeat Playback
(Remote control only)
DISPLAY
TIME
REPEAT
1
RANDOM ( REPEAT )
One-track Repeat
(Remote control only)
DISPLAY
TIME
REPEAT
1
RANDOM ( REPEAT )
4th track
The track is repeated
continuously.