STEREO CD PLAYER DCD - 1650SR OPERATING INSTRUCTIONS OPEN / CLOSE PEAK AUTOSPACE AUTO EDIT DISPLAY PLAY TIME PAUSE REPEAT STOP RANDOM DIRECT PROGRAM INDEX PLAY STOP CLEAR CALL REMOTE CONTROL UNIT RC-281 POWER OPEN/CLOSE PHONES PHONES LEVEL DISPLAY ¢ £...
2. Do not open the top cover In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON DEALER. 3. Do not place anything inside Do not place metal objects or spill liquid inside the CD player.
Page 3
ENGLISH FRONT PANEL PLAY STOP POWER OPEN/CLOSE PHONES PHONES LEVEL DISPLAY ¢ £ TRACK INDEX TIME ‚¤ ‚⁄ ‚‹ ›° 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 DCD-1650SR COMPACT DISC PLAYER REAR PANEL...
Page 4
ENGLISH NOTE ON USE • Do not let foreign objects in the set. • Keep the set free from moisture, water, and dust. • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Unplug the power cord when not using •...
ENGLISH Thank you for purchasing this DENON Compact Disc Player. Please FEATURES read the operating instructions thoroughly in order to acquaint The DCD-1650SR is the penultimate CD player. It features AL24 yourself with the CD player and achieve maximum satisfaction from Processing developed by DENON to allow analog waveform restoration for a new generation of high-performance media.
• Digital data is output in optical from this jack. • Press this button to move the pickup forward to the • Contact your nearest DENON Consumer Center or office for beginning of the next track. Press again to move ahead to information on the optical fiber cable to be used for other tracks.
ENGLISH CONNECTION (1) Connections to the Analog Output Jacks Connection Precautions Using the included pin cords, connect the left (L) and right (R) • Before proceeding with connections or disconnections of cables output jacks on the DCD-1650SR to the left (L) and right (R) CD, and power cords, be sure to turn all system components off.
ENGLISH OPENING AND CLOSING THE DISC HOLDER NORMAL CD PLAYBACK AND LOADING A DISC (1) Starting Playback Opening and closing the disc holder (This operation only works ( PLAY ) while the power is on.) 1. Press the power switch (POWER) to turn on the power. 2.
ENGLISH ADVANCED CD PLAYBACK Direct Search Index Search (1) Playing a Specific Track ........(4) Finding Sections Within a Track ..... (Remote control only) (Remote control only) • Use this function to start playback from certain sections within a DIRECT track divided by index numbers.
Page 10
ENGLISH w Checking the Programmed Tracks (Remote control only) Repeat Playback (6) Play All Tracks Repeatedly ......(Remote control only) DIRECT PROGRAM DISPLAY INDEX PLAY TIME CLEAR CALL PLAY ) PAUSE ( CALL ) REPEAT STOP RANDOM ( REPEAT ) REMOTE CONTROL UNIT RC-281 1.
Page 11
ENGLISH w Manual Search Reverse Pause (8) Stopping Momentarily During Playback ....(Remote control only) DISPLAY • Playback can be stopped momentarily then resumed from the PLAY TIME same point. PAUSE REPEAT DISPLAY STOP RANDOM PLAY TIME PAUSE Hold in the manual search reverse button ( REPEAT PAUSE ) STOP...
Page 12
ENGLISH (11) Pausing At the Beginning of a Track (13) Edit Recording on Sides A Pause Edit Function After Searching ............and B of the Tape .......... (Remote control only) Auto Edit Function (AUTO EDIT) (Remote control only) q Direct Search The auto edit function automatically divides the tracks on the compact disc into sides A and B, with the division at the beginning •...
ENGLISH THE COMPACT DISC NOTE: • The peak search function reads the level of the disc from 1. Precautions on handling compact discs the beginning of the disc to the end at a fixed interval and • Do not allow fingerprints, oil or dust on the surface of the regards the maximum value that was read as the peak.
ENGLISH TROUBLESHOOTING If the CD player does not seem to be functioning properly, check the following: Disc holder does not open or close. A specific section of the disc will not play. • Is the power on? • Is the disc dirty or scratched?........See page 13 When a disc is loaded, 00 0000 is displayed.
ENGLISH REMOTE CONTROL UNIT RC-281 Setting to the Program Mode • For program search, press the PROGRAM button then the number buttons (0 through 9 and +10). • The remote control unit is normally set to the direct mode. Disc Holder Open/Close button OPEN/CLOSE ) OPEN/ CLOSE...
Need help?
Do you have a question about the DCD-1650R and is the answer not in the manual?
Questions and answers