ProForm 910 E Elliptical Manual page 16

17. Untie and discard the wire tie on the Main Wire
(110).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (110) and to the Right
and Left Sensor Wires (63, 69).
Insert the excess wire into the Upright (4) or into
the Console (7).
18. Tip: Avoid pinching the wires. Attach the
Console (7) to the Upright (4) with four #8 x 1/2"
Screws (124).
19. Orient the Rear Upright Cover (80) as shown.
Attach the Rear Upright Cover (80) to the Upright
(4) with four #8 x 3/4" Screws (123).
17
7
110
18
7
4
124
19
80
16
63, 69
4
Avoid pinching
the wires
124
123
123
4