ProForm 910 E Elliptical Manual page 15

15. Insert the Right Upper Body Arm (61) into the
Right Upper Body Leg (36).
Attach the Right Upper Body Arm (61) with two
M8 x 35mm Bolts (96) and two M8 Locknuts
(102). Make sure that the Locknuts are in the
hexagonal holes.
Repeat this step on the other side of the
elliptical.
See step 14. Tighten the M8 x 16mm
Screws (120).
16. Attach the Right Inner Cover (68) to the
Right Upper Body Arm (61) with a #8 x 3/4"
Screw (123).
Identify the Right Outer Cover (67) and orient it
as shown.
Attach the Right Outer Cover (67) to the Right
Inner Cover (68) and the Right Upper Body Leg
(36) with two #8 x 3/4" Screws (123).
Repeat this step on the other side of the
elliptical.
15
61
16
123
15
96
36
Hexagonal
Holes
102
61
68
36
67
123