D-Link DI-524 Manual page 89

Frequently Asked Questions (continued)
How do I set up my router to use iChat? -for Macintosh users-
(continued)
Step 3
Create a new firewall rule:
Click Enabled.
Enter a name (ichat1).
Click Allow.
Next to Source, select
WAN under interface.
In the first box, enter an *.
Leave the second box
empty.
Next to Destination, select
LAN under interface.
Enter the IP Address of the
computer you are running
iChat from.
Leave the second box empty. Under Protocol, select UDP. In the port range boxes,
enter 5060 in the first box and leave the second box empty.
Click Always or set a schedule.
Step 4
Click Apply and
then Continue.
Step 5
Repeat steps 3 and 4
enter ichat2 and open
ports 16384-16403 (UDP).
89