D-Link DI-524 Manual page 16

Using the Configuration Menu (continued)
Please be sure
to remove any
existing PPPoE client
software installed on
your computers.
Choose PPPoE (Point
to Point Protocol over
E t h e r n e t ) i f y o u r
ISP uses a PPPoE
c o n n e c t i o n . Yo u r
ISP will provide you
with a username and
password. This option
is typically used for
DSL services. Select
Dynamic PPPoE to
obtain an IP address
automatically for your
PPPoE connection.
Select Static PPPoE to
use a static IP address
f o r y o u r P P P o e E
connection.
PPPoE-
User Name-
Retype Password-
Service Name-
IP Address-
Primary DNS
Address-
Secondary DNS
Address-
Home > WAN > PPPoE
Choose this option if your ISP uses PPPoE. (Most DSL users
will select this option.)
Dynamic PPPoE-
Static PPPoE-you have an assigned (static) IP Address.
Your PPPoE username provided by your ISP.
Re-enter the PPPoE password
Enter the Service Name provided by your ISP (optional).
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
Primary DNS IP address provided by our ISP
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
(Continued on the next page)
receive an IP Address automatically from your ISP.
16