Table of Contents
Advertisement
English
The Answering Machine
Remote Activation
The answering machine can be activated using the remote control functions.
1. Call up the answering machine. After approximately 10 rings, the machine
will answer and emit a long tone.
2. Enter the remote code, see page 18. If the code is accepted, you will hear
two short beeps.
3. Press
. One beep confirms that the answering machine is now on.
7#
Replace the handset.
Voice Control (VOX)
The answering machine will record a message as long as the caller keeps
speaking (max. time 120 seconds). If the caller stops speaking, the answering
machine will disconnect after approximately 7 seconds.
Out of Memory
The total capacity of the answering machine's memory is approximately 40
minutes. The memory space is shared between the outgoing message, personal
memos, and regular incoming messages.
When the memory is full the display will show PLEINE, the answering machine
will answer after 10 rings to allow remote playback and deletion of messages, no
new messages will be accepted until the existing messages have been played and
erased.
1
www.doro.com
Advertisement
Table of Contents
