Table of Contents
Advertisement
The Answering Machine
Remote Activation
The answering machine can be activated using the remote control functions.
1. Call up the answering machine. After approximately 10 rings, the machine
will answer and emit a long tone.
2. Enter the remote code, see page 14. If the code is accepted, you will hear
two short beeps.
3. Press
. One beep confirms that the answering machine is now on.
7#
Replace the handset.
Out of Memory
The total capacity of the answering machine's memory is approximately 40
minutes. The memory space is shared between the outgoing message, personal
memos, and regular incoming messages.
When the memory is full the display will show TAD MEMORY FULL, the
answering machine will answer after 10 rings to allow remote playback and
deletion of messages, no new messages will be accepted until the existing
messages have been played and erased.
www.doro.com
English
Advertisement
Table of Contents
