Troubleshooting - Doro PHONEEASY 410GSM User Manual

Phone cannot be switched on
Battery charge low
Battery incorrectly installed
Failure to charge the battery
Battery or charger damaged
Battery recharged in temperatures
< 0°C or > 40°C
Charger incorrectly connected to
phone or power socket
Standby time decreases
Battery charge capacity too low
Too far from base station, phone
is constantly searching for signal
Failure to place or receive calls
Call barring activated
PIN code not accepted
Wrong PIN code entered too many
times
37
English

Troubleshooting

Connect the power adapter and
charge the battery for 3 hours.
Check the installation of the
battery.
Check the battery and charger.
Improve the charging
environment.
Check the charger connections.
Install a new battery.
Searching the network consumes
battery power. Find a place with
a stronger signal, or temporarily
turn off the phone.
Deactivate call barring. If this
does not solve the problem,
contact the network operator.
Enter the PUK code to change
the PIN code, or contact the
network operator.