Table of Contents
Advertisement
8 electrolux
Reduce the spin speed or select the
available functions by turning the spin
selector dial (2)
The spin speed dial allows you to select the
spin speed of the selected programme or the
available functions.
The spin speeds indicated on the dial refer to
the cotton programmes.
Spin
Pro-
speed
grammes
selector
with 1400
position
rpm
maximum
speed al-
lowed
position
1400
«1400»
position
900
«900»
position
700
«700»
position
If you select the spin programme and
the spin speed dial remains on this
position, the appliance will perform
the spin at the maximum speed .
position
If you select the spin programme and
the spin speed dial remains on this
position, the spin will be performed
by the appliance at 700 rpm .
Select the available options by pressing
buttons 4 and 5
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the programme.
When these buttons are pressed, the corre-
sponding pilot lights illuminate. When they
are pressed again, the pilot lights go out. If
an incorrect option is selected, the integrated
red pilot light of the button 6 flashes for 3
times.
For the compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».
Select the Delay Start by pressing
button 7
Before you start the programme, if you wish
to delay the start, press the button 7 repeat-
edly, to select the desired delay. The relevant
light illuminates.
Pro-
Pro-
grammes
grammes
with 900
with 700
rpm
rpm
maximum
maximum
speed al-
speed al-
lowed
lowed
900
700
700
700
700
700
You must select this option after you have set
the programme and before you start the pro-
gramme.
You can cancel or modify the delay time at
any moment, before you press button 6 .
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton 7 .
3. Press button 6 :
– the machine starts its hourly count-
down.
– The programme will start after the se-
lected delay has expired.
Cancelling the delayed start after having star-
ted the programme:
1. Set the washing machine to PAUSE by
pressing button 6 .
2. Press button 7 once, the light relevant to
the selected delay goes off
3. Press button 6 again to start the pro-
gramme.
The Delay Start can not be selected with
DRAIN programme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the delay
time. If you need to open the door, you must
set the machine to PAUSE (by pressing the
button 6 ) and then wait a few minutes. After
you have closed the door, press the button
6 again.
Start the programme by pressing button
6
To start the selected programme, press the
button 6 , the corresponding green pilot light
stops blinking. The appliance starts operat-
ing and the only pilot light corresponding to
the running phase stays on.
To interrupt a programme which is running,
press the button 6 : the corresponding green
pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 6
again . If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the red pilot
light of the button 6 blinks 3 times.
Advertisement
Table of Contents
