Loading The Multipurpose Feeder - Lexmark W850 User Manual

Loading paper and specialty media

Loading the multipurpose feeder

The multipurpose feeder can hold several sizes and types of print media, such as transparencies, labels, card stock, and
envelopes. It can be used for single-page or manual printing or as an additional tray.
The multipurpose feeder can hold approximately:
•
100 sheets of 75 g/m
• 10 envelopes
•
75 transparencies
The multipurpose feeder accepts paper or specialty media within the following dimensions:
• Width—89 mm (3.5 in.) to 297 mm (11.7 in.)
• Length—98.4 mm (3.8 in.) to 431.8 mm (17 in.)
Notes:
– Maximum width and length can be applied only to short-edge feeding.
–
Only the multipurpose feeder guide can support the minimum size.
Note: Do not add or remove paper or specialty media when the printer is printing from the multipurpose feeder or
when the printer control panel indicator light is blinking. Doing so may cause a jam.
1
Pull down the multipurpose feeder door.
2
Gently pull the extension until it is fully extended.
2
(20 lb) paper
51