TechniSat DigiBox CRYPTOWORKS Instruction Manual page 45

Problem
No reception of channels pre-
viously received
Remote control not working
Time not displayed in Standby
mode
Temporary interruptions on Pro 7,
Sat.1, TM3, Cable 1, DSF and
HOT
Your receiver bears the CE control label, and complies with all relevant EU standards.
TechniSat and DigiBox CRYPTOWORKS are registered trademarks ofTechniSat Digital GmbH
Possible Cause
Dish faulty, or position changed
Channel moved to another trans-
ponder
Channel no longer broadcast
Wrong mode set
Batteries spent
Time not entered
Interference caused by DECT
cordless telephones
Subject to change and printing errors. Correct at 03/01
P.O.Box 560
D-54541 Daun
www.technisat.de
Germany
45
Solution
Check dish
Initiate search (see point 7.7)
None
Change mode to SAT1
Replace batteries
Set to ZDF for 30 secs.to acquire
time
Place telephone base station furt-
her from receiver