Table of Contents
Advertisement
Setup menu
Enter the Setup menu by pressing »MENU«
Select »Call setup«
During a conversation, your telephone can
notify you that a new call is waiting. This is
indicated by a special ringing tone in the
earphone and gives you the option of
answering or rejecting the new call.
When selecting »Call waiting« from the Call
setup menu you get three options:
»Activate« – to activate call waiting
»Cancel« – to cancel call waiting
»Status« – to see whether call waiting is
activated or not
See the Conversation menu on page 34 for
further details on how to handle multi-party
calls.
This is a network feature by which the use of
your telephone is restricted to certain phone
numbers within a group defined by the net-
work operator and the owner of the SIM card.
You may be a member of different groups.
Each group has its own ID number.
The network defines which group is your
default user group. You have the option of
calling outside the group – perhaps at a higher
charge.
22
You can choose whether you want your phone
number to be shown or not at the next
outgoing call. Your options at this point are:
»Show ID for next call«
»Hide ID for next call«
Some network operators offer Alternate Line
Service. This allows you to have two separate
speech lines and phone numbers on the same
telephone. If you have two separate lines, you
can alternate between these by entering this
sub menu. In the standby display the small
number on the left or the right side of the
signal strength indicator (cf. page 39) informs
you whether you are on line one or line two.
Enter the Setup menu by pressing »MENU«
Select »Tones setup«
The Tones setup menu gives you different
options for the tones that your phone offers you
for various functions:
»Ringing tone«
»Trembler«
»SMS message tone«
»SMS broadcast tone«
»Key tone«
»Factory settings«
You can adjust the ringing volume level and
select the ringing tone according to your
surroundings and preferences.
Ringing volume levels are high, medium,
low, escalating, and off. If the ringing tone is set
to »off« you will see the
symbol in the
standby display.
You have the option of selecting between 27
different ringing tone patterns. While you are
making your selection, the displayed ringing
tone will sound.
You can disable all kinds of tones by pressing
»MENU« and then
. In that case the symbol
will be flashing in the display. Just press
»MENU« and
again to revert to your
original settings.
If you have a trembler battery you can select
whether the trembler should be active or not
at an incoming call.
23
Setup menu
Your telephone can alert you to the arrival of a
point-to-point message by means of different
alert tones. You have the option of setting the
message tone volume to high, medium, low, or
off, and the option of selecting between the
same 27 tone patterns as for your ringing tone.
Your telephone can alert you to the arrival of a
broadcast message by means of different alert
tones. Your options are the same as mentioned
above under SMS Message tone.
To help you keep check on your dialling, you
can choose between 8 different tone patterns
for your keypad. The chosen tone will follow
every key pressed.
This option brings you back to the original
tones setup of your phone. The phone is set up
by the manufacturer as follows:
Ringing volume level:
Loud
Ringing tone:
British
Trembler:
Off
SMS Message tone:
Simple
SMS Broadcast tone:
Discreet 1
Key tone:
3
Advertisement
Table of Contents
