Table of Contents
Advertisement
5.2.2 DHCP Client
DHCP Client: It is to enable or disable (default) the Router WAN as a DHCP client,
where the ISP would be the DHCP server. DHCP Client is generally used in the following
encapsulations: 1483 Bridged IP LLC, 1483 Routed IP LLC, 1483 Bridged IP VC-MUX,
1483 Routed IP VC-Mux, and Classical IP over ATM. This option is for non-static
(dynamic) IP addresses.
Host Name: When DHCP Client is Enabled, copy the ISP recognized Host Name here.
The Host Name can be up to 19 characters.
5.2.3 MAC Spoofing
MAC Spoofing: Enable MAC Spoofing to make a different MAC Address appear on the
WAN side. This is also used to solve the scenario where the ISP only recognizes one
MAC Address. System default is Disable.
MAC Address: When MAC Spoofing is enabled, copy the ISP-recognized MAC address
here. Format for MAC address is six pairs of hexadecimal numbers (0-9, A-F) separated
by colons. System default is: 00:00:00:00:00:00.
5.2.4 Static IP Settings
Static IP Settings are for users who have a Static IP Address (WAN side) from their ISP.
IP Address: It is the static IP Address given by the ISP.
Range: x.x.x.y, where 0 ≤ x≤ 255 and 1 ≤ y≤ 254
Subnet Mask: It is the subnet mask given by the ISP.
Range: x.x.x.x, where 0 ≤ x≤ 255
Gateway: It is the Gateway given by the ISP.
Range: x.x.x.y, where 0 ≤ x≤ 255 and 1 ≤ y≤ 254
Default: 255.255.255.0
5
Default: 192.168.241.101
Default: 0.0.0.0
Advertisement
Table of Contents
