Jeep 2012 Wrangler User Manual page 16

GETTING STARTED
Two-Door Model
• The tether strap should be attached to the tether anchor on the rear of
the seatback using the most direct path. For the outboard seating
positions, route the tether underneath the head rest and attach the hook
to the tether anchor located on the back of the seat.
Four-Door Model
Two-Door Model
14
• Loosen the child seat adjusters on
the lower straps and tether straps
so that you can attach the hook or
connector to the lower and tether
anchorages more easily.
• Attach the lower hooks or
connectors over the top of the
anchorage bars, pushing aside the
seat cover material. You will easily
feel the anchorage bars if you run
your finger along the intersection
of the seatback and seat cushion
surfaces.
• Tighten all three straps as you
push the child restraint rearward
and downward into the seat.