If A Fuse Blows - Honda 2003 ST1300lA Owner's Manual

All of the electrical circuits on your motorcycle have fuses to protect them from
damage caused by excess current flow (short circuit or overload).
If something electrical on your motorcycle stops working, the first thing you
should check for is a blown fuse.
Determine from the chart on the circuit fuse box cover which fuse or fuses
control that component. Check those fuses first, but check all the fuses before
looking elsewhere for another possible cause of the problem. Replace any blown
fuses and check component operation.
The circuit fuse box (including spare fuses) is located behind the left side
cover.
The main fuse A (and spare) are located near the starter motor magnetic
switch behind the right side cover.
The main fuse B is located behind the right side cover.
Recommended Fuses
main fuse A
main fuse B
other fuses
Circuit Fuses
1. To prevent an accidental short circuit, turn the ignition switch OFF before
checking or replacing the fuses.
2. Remove the left side cover (page 88
3. Open the fuse box cover.
LEFT SIDE
30 A
65 A
30A, 20A, 15A, I O A
).
Taking Care of the Unexpected

If a Fuse Blows

fuse box cover
163