Specifications - Teac CD-W524E User Manual

9. SPECIFICATIONS

1. Disk
Applicable disk
Writable disk
Disk diameter
Write methods
Disk rotational speed (40X CAV)
2. Drive performance
Data transfer rate
(Asynchronous transfer)
Access time
Starting time from
power on
Data buffer capacity
3. Data read error rate
4. Front panel
Button
Indicator (LED)
Headphone output
Volume control
5. Rear panel
Rear panel
Interface connector
Audio output
Strap switch
6. Operating environment
Place of operation
Place of storage
7. Dimensions/weight
Dimensions (WHD)
Weight
8. Safety standards
9. Reliability
MTBF
46
CD-ROM Mode-1/650MB/700MB (40 X CAV)
CD-ROM XA Mode-2 (Form-1)/650MB/700MB (40 X CAV)
CD-RW (17 X to 32 X Z-CAV)
CD-ROM XA Mode-2 (Form-2)/738MB/795MB (17 X to 32 X Z-CAV)
CD-DA/74min/79min (17 X to 32 X Z-CAV (DAE))
Photo-CD (Multisession), CD-I, Video CD, CD PLUS
12 cm CD-R /CD-RW
The best results and the highest performance are ensured by using
TEAC CD-R/CD-RW media. Your dealer will tell you the sources of
those CD-Rs/CD-RWs.
12cm, 8cm
Disk at once, Track at once, Session at once, Packet write
8,560rpm approx.
Sustained: 6.0MB/sec max. (outermost tracks)
.. 4.6MB/sec (Average)
Program I/O: 16.6MB/sec max. (Default: PIO Mode-4)
Burst DMA: 16.6MB/sec max. (Default: MW DMA Mode-2)
Burst UDMA: 33.3MB/sec max. (Default: ULTRA DMA Mode-2)
80msec typical (Random stroke), by TEAC standard
13sec or less (Average) (excluding the multisession photo CD), by
TEAC standard
2MB
12
Block/10 bits (Mode-1 and Mode-2, Form-1)
Block/10 9 bits (Mode-2, Form-2 and CD-DA)
Auto eject or Auto inject
Green (left LED), Green (right LED)
Stereo mini-jack (ø 3.5 mm) 0.6±0.3V 32 Ohm
Thumb wheel knob
+5V, +12V
IDE (ATAPI)
Line out 0.7±0.3V 47 kOhm
Mode setting straps (Master)
Temperature 5 to 40°C,
Humidity 20 to 80% (noncondensing)
Temperature -30 to 60°C,
Humidity 10 to 80% (noncondensing)
146 x 42 x 192mm
1,200g
UL, CSA, TÜV, CE
100,000 POH (Duty 10%)
9. Specifications