Connection To Audio Equipment - Teac CD-W524E User Manual

If the mounting rails are necessary for installation in a personal
computer, contact the personal computer maker or dealer.
Note:
Be sure to use mounting screws provided. If longer than specified
screw is used, the CD-W524E may be damaged. Please ensure to
set the master or slave jumpers correctly.
(2) Connect the power cable, the interface cable of the IDE interface
card and the audio cable to the CD-W524E, respectively.
Audio cable
Interface cable
Note:
The interface connector and the audio connector are polarized.
Be sure Pin 1 on all cable connectors match with drive connectors.

6. CONNECTION TO AUDIO EQUIPMENT

The CD-W524E can output the LINE OUT audio signal through the
headphone jack via the Sound Card.
42
CD-W524E
Pin 1
Power cable
6. Connection to Audio Equipment