Drain Pump - Electrolux Swissline GL EWF 1082 User Information

Drain pump

The drain pump is maintenance-free. It is only neces-
sary to open the pump cover if there is a malfunction
and water is no longer being pumped out, e. g. if the
pump wheel is blocked.
Please make sure before loading the washing that
there are no foreign bodies in the pockets or caught
between the washing. Paperclips, nails, etc. that
may have got into the washing machine with the
washing remain in the pump housing (foreign body
trap that protects the pump wheel).
1
Warning! Before opening the pump cover,
switch off the washing machine and remove
the mains plug from the socket.
1. First carry out an emergency drain.
2. Place a cloth on the floor in front of the drain pump
cover.
Residual water runs out.
3. Unscrew the pump cover in an anti-clockwise di-
rection and remove it.
4. Remove foreign bodies and fluff from the pump
housing and from the pump wheel.
5. Check whether the pump wheel right at the back of
the pump housing can turn. (It is normal for the
pumping wheel to turn jerkily.) If the pumping
wheel cannot be turned, please contact the Cus-
tomer Care Department.
6. Insert the pump cover. Insert the guides at the
sides of the cover into the guide slots and tighten
the cover by turning in a clockwise direction.
7. Close off the emergency drain hose and place it in
the support.
8. Close plinth flap.
20