Switching On The Appliance/ Selecting A Programme; Changing The Spin Speed/Selecting Rinse Hold - Electrolux Swissline GL EWF 1082 User Information

Switching on the appli-
ance/ selecting a pro-
gramme
Set the programme and temperature using the pro-
gramme knob.
3
By selecting a programme, you switch the ap-
pliance on at the same time.
– The programme progress display indicates the
programme steps that the selected programme will
perform.
– In the multi-display the
estimated length of the programme (in minutes)
appears.
Changing the spin speed/
selecting rinse hold
The washing machine suggests the maximum per-
mitted speed that is suitable for the selected pro-
gramme. You can reduce this speed:
Press the SPIN/RINSE HOLD button repeatedly until
the desired display lights up.
3
The speed for the final spin can still be altered
during the programme. To do this:
1. Press the START/PAUSE button.
2. Change the speed.
3. Press the START/PAUSE button again.
n RINSE HOLD
With n (RINSE HOLD) the washing is left to soak in
the final rinse water. There is no final spin after the in-
termediate spin(s). Intermediate spins are pro-
gramme-dependent and cannot be altered.
12