Auto-Tuning On The Mfd - Garmin G1000 Pilot's Manual

OPERATION – AUTO-TUNING

AUTO-TUNING ON THE MFD

Frequencies can be selected and loaded from the fol-
lowing MFD pages:
• WPT – Airport Information
• WPT – VOR Information
• NRST – Nearest Airports
• NRST – Nearest VOR
• NRST – Nearest Frequencies
Figure 4.4.3 MFD Page Group Icon
NOTE: In NAV mode, upon any VOR/ILS approach
activation, the appropriate NAV frequency is
automatically loaded into the standby field of
the selected NAV radio, regardless of the cur-
rent MFD page that is displayed.
NOTE: In GPS mode, upon any VOR/ILS approach
activation, the appropriate NAV frequency is
automatically loaded into the active field of
NAV1, regardless of the current MFD page that
is displayed.
4-14 Garmin G1000 VHF NAV/COM Pilot's Guide for Mooney M20M & M20R
WPT – Airport Information Page
The Airport Information Page displays runway infor-
mation and a list of frequencies for the selected airport
identifier as well as departure, arrival and approach in-
formation.
To display the entire list of frequencies for a
desired airport:
1. On the Airport Information Page, press the
INFO softkey to display runway and frequency
information for a specific airport.
Press the FMS knob to activate the selection
2.
cursor in the window.
3. Turn the FMS knob to select the desired airport
identifier and press the ENT key. A list of all
available frequencies for the selected airport
appears.
Figure 4.4.4 WPT – Airport Information Page (INFO)
190-00445-00 Rev. A