Selecting A Nav Radio - Garmin G1000 Pilot's Manual

Vhf nav/com pilot’s guide for mooney m20m & m20r

Hide thumbs Also See for G1000:

Table of Contents

Enlarged version

SELECTING A NAV RADIO

The desired NAV radio can be selected using the CDI

softkey located on the PFD. The three navigation modes

that can be selected with the CDI softkey are as follows:

• VOR1 (or LOC1) – If NAV1 is selected as the NAV

mode, a single green arrow labeled either 'VOR1'

or 'LOC1' is displayed on the HSI and the active

NAV1 frequency is displayed in green.

• VOR2 (or LOC2) – If NAV2 is selected as the NAV

mode, a double green arrow labeled either 'VOR2'

or 'LOC2' is displayed on the HSI and the active

NAV2 frequency is displayed in green.

• GPS – If GPS mode is selected, a single magenta

arrow appears on the HSI and neither NAV radio

is selected.

NOTE: In GPS mode, both active NAV frequencies

are displayed in white.

NOTE: When a VOR signal is received, the cor-

responding VOR/LOC name identiﬁer is displayed

to the right of the associated active NAV fre-

quency.

190-00445-00 Rev. A

Garmin G1000 VHF NAV/COM Pilot's Guide for Mooney M20M & M20R

NAV radio selection is

performed via the CDI

softkey.

Figure 4.3.6 Selecting a NAV Radio

OPERATION – NAV

4-11

Table of Contents