Garmin G1000 Pilot's Manual page 21

NRST – Nearest Frequencies Page
The Nearest Frequencies Page displays a list of nearest
ARTCC, FSS and WX frequencies. For the purpose of fre-
quency selection, the selection cursor can be activated on
the ARTCC, FSS, or WX windows by using the ARTCC,
FSS and WX softkeys, respectively.
To view a nearest ARTCC frequency and load
it into the standby frequency field:
1. Press the ARTCC softkey to activate the selec-
tion cursor in the Nearest ARTCC window.
Turn the small FMS knob to scroll through the
2.
list of ARTCC names, then the large FMS knob
to highlight the desired ARTCC frequency.
3. Press the ENT key to load the desired ARTCC
frequency into the tuning box.
NOTE: The Nearest ARTCC window contains a
numbered list of ARTCC names as well as associ-
ated bearing and distance information.
To view a nearest FSS frequency and load it
into the standby frequency field:
Press the FSS softkey to activate the selection
1.
cursor in the Nearest FSS window.
2. Turn the small FMS knob to scroll through the
list of FSS names, then the large FMS knob to
highlight the desired FSS frequency.
Press the ENT key to load the desired FSS
3.
frequency into the tuning box.
NOTE: The Nearest FSS window contains a
numbered list of FSS names as well as associated
bearing and distance information.
190-00445-00 Rev. A Garmin G1000 VHF NAV/COM Pilot's Guide for Mooney M20M & M20R
OPERATION – AUTO-TUNING
To view a nearest WX frequency and load it
into the standby frequency field:
Press the WX softkey to activate the selection
1.
cursor in the Nearest WX window.
2. Turn the FMS knob to highlight the desired WX
frequency.
Press the ENT key to load the desired WX fre-
3.
quency into the tuning box.
Figure 4.4.9 NRST – Nearest Frequencies Page
4-19