Prioritizing Traffic On The Powerline Network (Qos) - NETGEAR XAV1004 User Manual

5. Select the Main tab, and then click Scan. Check that all devices are detected with your
network encryption key.

Prioritizing Traffic on the Powerline Network (QoS)

You can prioritize data traffic on your Powerline network by setting the Quality of Service (QoS)
for each Powerline device in your network.
On the QoS tab, you can configure the priority for packets forwarding in the powerline network by
setting priority values for each device in your network. You do this by defining priorities for
VLAN (Virtual Local Area Network) Tags and TOS (Type of Service) Bits.
Figure 2-8
On the QoS tab, do the following:
1. Select the device that you want to configure by highlighting it.
2. Enter the Destination MAC Address, and select the priority.
3. Enter the Destination IP PORT Number, and select the priority.
4. Select the priorities for each VLAN tag from the drop-down lists.
Securing and Configuring Your Powerline Network
XAV1004 Powerline AV Ethernet Adapter User Guide
v1.1, September 2009
2-12