NETGEAR XAV1004 User Manual page 21

1. On the Main tab, click the device name for a remote Powerline device to highlight it.
Figure 2-2
2. Click Factory Reset, and a confirmation message displays.
3. Click OK to reset the device. A message indicates whether or not the operation succeeded.
4. After you have reset each device, check that the Main tab lists all devices in the network. If it
does not, click the Scan button to see all the devices in the network.
Securing and Configuring Your Powerline Network
XAV1004 Powerline AV Ethernet Adapter User Guide
v1.1, September 2009
2-5