NETGEAR XAV1004 User Manual page 24

Changing the Network Encryption Key
You can change the network encryption key from the Security tab:
Figure 2-4
1. To change the encryption key for a remote device, you must enter the password for the device.
The password is printed on the product label.
Note: Be sure to save the encryption key for your records after you change it. The
encryption key will always display as HomePlugAV after changing.
2. Click the rectangle in front of the remote Powerline device to select it.
Figure 2-5
Securing and Configuring Your Powerline Network
XAV1004 Powerline AV Ethernet Adapter User Guide
v1.1, September 2009
2-8