NETGEAR XAV1004 User Manual page 13

Table 1-2. XAV1004 Ethernet Ports and Buttons
Item Description
Ethernet ports Use these four ports to connect to connect the XAV1004 to peripheral devices, such
as gaming consoles, DVD players, internet phones, or storage devices. The ports
use a QoS priority algorithm to determine levels of service. For more information
about connecting devices to these ports, see
on page
Security button Configure security (see
on page
Reset button To reset, use a sharp object such as a pen or a paper clip to briefly press and hold
this button (for no more than two seconds). The adapter automatically returns to
factory default settings, and then restarts.
Note: Pressing the reset button longer than recommended may interfere with
resetting the adapter.
XAV1004 Label
Figure 1-4
The label on the rear panel of the XAV1004 contains the items listed below.
• Model number
• MAC address
• Serial number
• Device password (PWD)
Installation and Basic Configuration
XAV1004 Powerline AV Ethernet Adapter User Guide
1-7.
"Changing the Default Encryption Key using Push 'N' Secure"
2-2).
v1.1, September 2009
"Connecting Devices to the XAV1004"
1-5