Using The Plug-In Manager Software; General - Use Audio Plugiator User Manual

Plugiator User Manual

Using the Plug-in Manager Software

Using the Plug-in Manager Software
Using the Plug-in Manager Software
Using the Plug-in Manager Software Using the Plug-in Manager Software

General

General General
General General
To control your Plugiator with the Plug-in Manager software, you will need to connect
the Plugiator to a computer via USB or MIDI. (Please refer to the previous chapter
"USB connections and Driver installation")
Double clicking on the shortcut called "Plug-in Manager" will load the application.
The software will prompt you to select the correct drivers to which the Plugiator is
connected. If you have connected over USB please select the USB Audio Device for the
input and output (figure shown below)
22