Use Audio Plugiator User Manual page 12

Plugiator User Manual
P P P P P reset reset reset reset
reset
The preset knob is used in the following actions:
a. Rotating to scroll through presets of the currently selected plug-in.
b. Single push down to enable numerical entry of a two-digit preset number
via the quick pads (preset 100 is entered as "00").
c. Push and hold down for 3 seconds to store & overwrite modified preset
parameters into the internal memory of the Plugiator.
Plugin Plugin Plugin
Plugin Plugin
The plugin knob is used in the following actions:
a. Rotating to scroll through the list of plug-ins available on your Plugiator.
b. Single push down to load the currently selected plug-in.
c. Push and hold down for 3 seconds to send an "all notes off" MIDI message.
That function is useful to shut off a note which got stuck. Stuck notes typically
indicate a flaw in the MIDI keyboard, the sequencer or the MIDI interface
and are not usually caused by the Plugiator synth itself.
V V V V V olume olume olume olume olume
The volume knob is used in the following actions:
a. Rotating to increase or decrease the output volume of the Plugiator both
on the Line outputs & the headphone out.
b. Push, hold down and then rotating to change the MIDI channel number
[Channel 1 till Channel 16 & OMNI]. The MIDI channel will be set to the
currently displayed number when you release the push function of the
knob.
12