Quick Pads - Use Audio Plugiator User Manual

Plugiator User Manual
Quick P Quick P ads Quick P ads ads ads ads
Quick P Quick P
The quick pads on the Plugiator are used in the following actions:
a. Single push down to engage the previously assigned preset or preset and
plug-in combination, corresponding to that quick pad number.
b. Push and hold down for 3 seconds to assign the currently loaded Plug-in
and Preset to the corresponding quick pad number.
Note: Note:
Note: When making an assignment to a quick pad the Plugiator stores the Plug-in Note: Note:
and Preset number that will be recalled when the quick pad is pushed. If you modify
a particular preset that was previously assigned to a quick pad, the quick pad would
then refer to and call up the modified sound.
14