System Settings; Video Output; Sleep Timer; Factory Settings - GoVideo R6750 User Manual

System Settings

Video Output

Activates the S-Video, Component Video,
or Progressive Scan output to your TV.
1
Press SETUP.
2
Select System > Video Output.
3
Choose from the following:
-
S-Video
Activates the S-Video
output.
Component - Activates the Compo-
nent Video output.
Progressive - Activates the Progres-
sive Scan output.
NOTE:
• Do NOT choose Progressive unless
you have connected the DVD
Recorder to a TV equipped with a
480p Progressive Scan input.
• If you select Progressive accidentally
and the picture is distorted, press
ENTER to cancel, or wait a few
seconds for the screen to revert to
normal.
Date & Time
Sets the date and time.This is necessary
if you wish to record TV shows with the
timer record feature.
1
Press SETUP.
2
Select System > Date
3
Set the month, day, and year.
• Use  to move the cursor.
• Use  to change each setting.
4
Select System > Time.
5
Set the hour, minutes, seconds, and
AM/PM.
• Use  to move the cursor.
• Use  to change each setting.
22
DVD Recorder User's Guide
S S
ETUP ETUP
Video Output
System
Date
Language
Time
Playback
Auto-sleep
Record
Default
Audio
TV Tuner
Exit

Sleep Timer

Sets the sleep timer.
1
Press SETUP.
2
Select System > Auto-sleep.
3
Set the timer from 30 to 120 minutes.
• The DVD Recorder will power off
automatically after the specified
time has elapsed.
• To disable the sleep timer, select Off.

Factory Settings

Restores the DVD Recorder to its original
factory settings.
1
Press SETUP.
2
Select System > Default > Restore.
• The DVD Recorder will restart with
all menu settings restored to their
factory defaults.
S-Video
11/14/2004
11:32:55AM
Off
-----------
SETUP
ENTER
����� ����
���������� ����