GoVideo R6750 Quick Start

6750
R

DVD Recorder

Quick Start

Welcome to the R6750 Quick Start Guide—the
fastest way to get started using your DVD
Recorder. Just follow these easy steps, from
unpacking and setting up to making your first
recording.
If for some reason you need additional help,
please make sure you have followed every step
in this Quick Start and have referred to the
User's Guide before calling customer service.
1
Unpack
R6750 DVD+R/RW RECORDER
POWER OPEN/CLOSE INPUT
LINE IN 2
DV IN VIDEO L - AUDIO - R
DVD Recorder
Remote Control 2 AAA Batteries
Blank DVD+RW
Power Cable
Use this cable in step 2
User's Guide/
Registration Card
Audio/Video Cable
Do you have an
Antenna or
Basic Cable?
Follow the instructions
on this panel.
1 Connect the unit to your TV and antenna/cable as shown.
2 Turn on the DVD Recorder.
3 Turn on your TV and select the TV's Video or Line input.
4 Follow Initial Setup below.
R Y R
COAXIAL
AUDIO IN AUDIO OUT
L L
ANTENNA IN
S-VIDEO IN Pb S-VIDEO OUT
OPTICAL
ANTENNA VIDEO Pr VIDEO
PASSTHROUGH
Antenna/ AV IN 2 COMPONENT OUT AV OUT DIGITAL OUT
(NO DVD OUTPUT)
Cable
Wall
Outlet
Search for Channels
1 Press SETUP.
2 Select TV Tuner > TV Signal, and choose:
• " Antenna" if you are using a standard antenna to
receive channels.
• "Cable" if you are using basic cable to receive
c hannels.
3 Select TV Tuner > Utilities > Start Scan:
• The unit scans for all available channels and stores
them in memory. This may take several minutes. When
scanning is complete, the DVD Recorder tunes to the
lowest channel found.
If you are using a Cable/Satellite Receiver...
Auto Search will detect the output channel of your receiver. Select channel 2, 3, or 4 on
the DVD Recorder to view the receiver, and then use your receiver's remote to select
the desired channels.
Note: For advanced connections, please refer to pages 16-19 of the User's Guide
2
Connect
...OR...
Antenna/Cable
Wall Outlet
ANTENNA IN
ANTENNA
PASSTHROUGH
(NO DVD OUTPUT)
3
Setup
S S S S
ETUP ETUP ETUP ETUP
Start Scan
TV Signal Auto
System
Add/Delete
Uilities -----------
Language
Swap
Playback
Record CH:15
Audio
TV Tuner
Exit
Do you have a
Cable Box or
Satellite Receiver?
Follow the instructions
on this panel.
1 Connect the unit to your TV and cable box/satellite receiver as shown.
2 Turn on your TV and select the TV's Video or Line input.
3 Turn on your Cable Box/Satellite Receiver.
4 Turn on the DVD Recorder and select channel 2, 3 o4 4.
5 Follow Initial Setup below.
Cable Box/
Satellite Receiver
OUTPUT
RF
IN OUT AUDIO VIDEO S-VIDEO
L
R
Y
R R COAXIAL
AUDIO IN AUDIO OUT
L L
S-VIDEO IN S-VIDEO OUT
Pb
OPTICAL
VIDEO Pr VIDEO
AV IN 2 COMPONENT OUT AV OUT DIGITAL OUT

Set the Clock

1 Press SETUP.
2 Select System > Date.
3 Use the / and /
buttons to set the month,
day, and year, then press
ENTER.
4 Select System > Time.
5 Use the / and /
buttons to set the time,
then press ENTER.
6 Press SETUP to exit.
S S S S
ETUP ETUP ETUP ETUP
Month/Day/Year
Video Output S-Video
System
09/17/2004
11/14/2004
Date
Language
Time 11:32:55AM
Playback
Auto-sleep Off
Record
Default -----------
Audio
TV Tuner
Exit