10
Control panel
Setting mode
The appliance is in setting mode when the programme selection button light is on
and 2 horizontal lines (- -) are visible in the digital display.
Always remember that when performing operations such as:
• setting the water softener
• activating/deactivating the rinse aid dispenser
• activating/deactivating the audible signals
the appliance MUST be in setting mode.
If the programme selection button light is on and the time duration (in minutes)
of a programme is visible in the digital display, the last performed programme is
still set.
In this case, to return to setting mode, the programme has to be cancelled.
To cancel a set programme or a programme in progress: press and hold the
RESET button until 2 horizontal lines will appear in the digital display. The pro-
gramme has been cancelled and the machine is now in setting mode.
Audible signals
Audible signals have been introduced to help indicate which operations the appli-
ance is performing:
• setting the water softener
• end of the programme
• intervention of an alarm due to malfunction.
Factory setting: audible signals activated.
It is possible to deactivate the audible signals, using the function buttons.
1. Press the On/Off button. The appliance must be in setting mode.
2. Simultaneously press and hold function buttons B and C, until the light of the
function buttons A, B and C start flashing.
3. Press function button C, the lights of buttons A and B turn off while the light
of function button C goes on flashing. The digital display indicates the current
setting.
= Audible signals deactivated
= Audible signals activated